Truck & Towing
#84 Standard Spindle Bearing Kit, Includes One 1/16" Outer Bearing & Race, 1-3/8" Inner Bearing & Race & Double Lip Seal, 1 Wheel.
1.25"W x 9/16"D, Shackle Strap, 2-5/8" Hole Center, r For Mounting Trailer Suspension Springs To Trailer Under Carriage.
BTR Spindle Bearing Kit, Includes One 1/16" Inner & Outer Bearings With Races, Double Lip Seal, 1 Wheel.
5/8", Heavy Duty, Trailer D Ring, 3" x 3" ID, Weld On Design, With Bracket, 5,000 Maximum Load Limit When Welded In Place Properly, Not Intended To Suspend Cargo Overhead.
2", Square Trailer Axles U-Bolt Kit, 5-3/4" x 9/16" Diameter Legs, With Rolled Threads For Maximum Strength, Includes Mounting Hardware, 2 U-Bolts & 4 Nuts.
3", Round Trailer Axles U Bolt Kit, 7" x 9-1/6" Diameter Legs, With Rolled Threads For Maximum Strength, Includes Mounting Hardware, 2 U-Bolts & 4 Nuts.
BT8 Spindle Replacement Trailer Wheel Hub Kit, 4 Bolt Hub With The Wheel Bolts On A 4" Bolt Circle, Equipped With 1/2" Diameter Wheel Studs, 1" Inside Diameter Inner & Outer Bearings, Races Are Pressed Into The Bearing Diameters, Designed For 1250 LB Capacity Axles.
12" Long, 2 Wire, Flat Loop, With Red & White Wire Insulation, Male & Female Bullet Style Connectors On Each End, Use On 12V To 24V DC Circuits & On Electrical Systems That Require A 2 Circuit Connection, Such As An On/Off Switch, Where A Length Extension Is Required.
12", 4 Wire Flat Loop, Extension Used On 12V Trailer Wire Circuits That Have A Trailer End & Vehicle End 4 Flat Connector On The Ends & Is Used To Extend The Trailer Electrical Connection To The Vehicle When The Trailer Tongue Is Longer Than The Wire.
7 Way, RV Style Trailer & Vehicle Wiring Kit, Contains Both A Vehicle & Trailer 7 Wire RV Connector, Several Feet Of Wire, Wire Splices, Connection Hardware & A Bracket To Mount The 7 Wire Vehicle Connector To The Vehicle.
Mounting Bracket, Use For A Vehicle To Mount A 7 Wire RV Style Trailer Connector To The Vehicle, Connects A 7 Wire RV Style Trailer Connector For Towing Purposes.
4 Way Flat Connecting Kit, A Wiring Kit With 4 Pole Flat Vehicle & Trailer Ends, Each Connector Has 12" Of 4 Flat Wire For Connection Purposes, Insulation Colors" Brown, White, Green & Yellow, Used On 12V DC Circuits Only.
Complete Trailer Wiring Kit, For Your Trailer & Vehicle, Includes A 20' Long, 4 Way Flat Wishbone Trailer Wire Harness That Is Split To Route The Wires To The Right & Left Side Of The Trailer, Trailer End 4 Flat Connector, 4 Way Flat Vehicle Connector & Wire Splices.
6 Way, Round Pin Vehicle End Connector, For Attachment To The Vehicle, Made Of Heavy Duty Zinc Die Cast Material, Use On 12V DC Trailer Circuits Only.
6 Way, Round Pin Trailer End Connector, For Trailers With 12V DC Circuits, Made Of A Heavy Duty Zinc Die Cast Material, Use On Trailers That Require A 6 Circuit Connector With Side Marker Light, Stop/Tail/Turn Lights & Electric Brake Circuits.